Heath Zenith P6036 User Manual

Browse online or download User Manual for Unknown Heath Zenith P6036. Heath Zenith P6036 User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
MANUAL MODE
AUTO
TEST
Replacement
Motion Sensor
Requirements
• The Light Control requires 120-volts AC.
• If you want to use Manual Mode, the control must
be wired through a switch.
Some codes require installation by a qualified
electrician.
598-1280-00
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight
hours.
LED indicates motion was sensed (day or night).
Model P6036
OPERATION
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
ON-TIME
10 5 1 TEST
10 5 1 TEST
ON-TIME
Put the ON-TIME switch in the 1,
5, or 10 minute position.
Put the ON-TIME switch on the
bottom of the sensor in the TEST
position.
Manual mode only works at night
because daylight returns the sen-
sor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
Move ON-TIME Switch to
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch
off for one second
then back on*
* If you get confused while switching modes, turn
the power off for one minute, then back on. After
the calibration time the control will be in the AUTO
mode.
TEST
AUTO
MANUAL MODE
... back on.
1 Second
OFF
then...
Mode: On-Time Works: Day Night
Test
5 Seconds x x
Auto
1, 5, or 10 Min
x
Manual
To Dawn*
x
Page view 0
1 2 3 4

Summary of Contents

Page 1 - OPERATION

MANUAL MODEAUTOTESTReplacementMotion SensorRequirements• The Light Control requires 120-volts AC.• If you want to use Manual Mode, the control must

Page 2 - INSTALLATION

-2-598-1280-00❒ Swing the sensor head towards the clamp screw.For eave mount only:ControlsINSTALLATIONWire the Light ControL WARNING: Turn power

Page 3 - SPECIFICATIONS

-3-598-1280-00Motion Least Sensitive Most SensitiveSensorMotionThe sensor is less sensitive to motion directly towards it, most sensitive to motion a

Page 4 - TROUBLESHOOTING GUIDE

-4-598-1280-00TROUBLESHOOTING GUIDESYMPTOMLights will not come on.Lights come on in daylight.Lights come on for no apparent reason.POSSIBLE

Comments to this Manuals

No comments