Heath Zenith 598-1112-04 User Manual download pdf (Page 4)

-4-

598-1112-04

Figure 4 - Mounting Snap-On Cover

INSTALL CHIME COVER

Place chime cover securely over base.

• For hang pin and hole covers: Attach hang pin to base prior

to mounting base on wall. Line up hole in cover with pin and hang

(see Figure 3).

• For snap-on covers: Apply pressure to the cover until it snaps

into place (see Figure 4). Firmly grasp cover and pull to remove

from base.

• For hang bracket covers: Determine if the cover will hang

vertically or horizontally on the base. Place bracket into the cor-

rect slot inside chime cover.

Adjust bracket (if necessary) so that bracket is ﬂush with back

surface of cover. Slide bracket into slot on base to hang cover (see

Figure 5).

Note: Never use cleaners or polishes. Never use any ﬂuids on the

chime mechanism. Use dry cloth to clean chime cover and base.

REAR

TRAN

Figure 3 - Pin for Hanging Cover

Hang Pin,

Snap-On Type

Illustrations may

vary from actual

chime unit.

Snap-On Cover

Base Orientation

Marking

Hang Pin, Slide-On Type

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Heath Zenith 598-1112-04 User Manual Page 4