Heath Zenith HB-4190 Series User Manual download pdf (Page 3)

3

595-5770-05

❒ When wiring to additional standard

ﬁxture only: Strip the motion sensor's

red wire and connect to the standard

light's black wire. Connect all white wires

together. Total ﬁxture ratings must not

exceed 360 Watts (3.0 A.).

NOTE: All wiring between ﬁxtures should

be run in accordance with the National

Electrical Code (Canadian Electrical Code

in Canada) through conduit or another

acceptable means. Contact a qualiﬁed

electrician if there is any question as

to the suitability of the system.

OPTIONAL WIRING

❒ This ﬁxture is provided with a sensor rated

for 360 Watts. Since the ﬁxture is only

rated 100 Watts, 260 Watts of additional

load may be controlled by this sensor.

❒ When determining what a ﬁxture is rated

for, do not simply look at the rating on the

lamp in the ﬁxture. Look at the marking

which speciﬁes the maximum lamp watt-

age for which the ﬁxture is suitable.

❒ Once you have selected the ﬁxtures

to be connected and determined their

maximum ratings, add these ratings up.

For instance, if you have 3 ﬁxtures rated

100 Watts, 150 Watts, and 75 Watts re-

spectively, you have a total load of 325

Watts.

Wiring to Motion Light &

Standard Fixture

BLACK

WHITE

BLACK

(Standard)

RED

WHITE

BLACK

BLACK

Master

Slave

Wiring to Control One Motion Sensing

Lantern (Slave) from Another (Master)

RED

WHITE

WHITE

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments